LPDBC=DISABLE, LPDBCEN1=NOT_ENABLE, LPDBCEN0=NOT_ENABLE, WKUPDBC=IMMEDIATE, SMEN=NOT_ENABLE, RTCEN=NOT_ENABLE, RTTEN=NOT_ENABLE, LPDBCCLR=NOT_ENABLE
Supply Controller Wake-up Mode Register
| SMEN | Supply Monitor Wake-up Enable 0 (NOT_ENABLE): The supply monitor detection has no wake-up effect. 1 (ENABLE): The supply monitor detection forces the wake-up of the core power supply. |
| RTTEN | Real-time Timer Wake-up Enable 0 (NOT_ENABLE): The RTT alarm signal has no wake-up effect. 1 (ENABLE): The RTT alarm signal forces the wake-up of the core power supply. |
| RTCEN | Real-time Clock Wake-up Enable 0 (NOT_ENABLE): The RTC alarm signal has no wake-up effect. 1 (ENABLE): The RTC alarm signal forces the wake-up of the core power supply. |
| LPDBCEN0 | Low-power Debouncer Enable WKUP0 0 (NOT_ENABLE): The WKUP0 input pin is not connected to the low-power debouncer. 1 (ENABLE): The WKUP0 input pin is connected to the low-power debouncer and forces a system wake-up. |
| LPDBCEN1 | Low-power Debouncer Enable WKUP1 0 (NOT_ENABLE): The WKUP1 input pin is not connected to the low-power debouncer. 1 (ENABLE): The WKUP1 input pin is connected to the low-power debouncer and forces a system wake-up. |
| LPDBCCLR | Low-power Debouncer Clear 0 (NOT_ENABLE): A low-power debounce event does not create an immediate clear on the first half of GPBR registers. 1 (ENABLE): A low-power debounce event on WKUP0 or WKUP1 generates an immediate clear on the first half of GPBR registers. |
| WKUPDBC | Wake-up Inputs Debouncer Period 0 (IMMEDIATE): Immediate, no debouncing, detected active at least on one Slow Clock edge. 1 (_3_SLCK): WKUPx shall be in its active state for at least 3 SLCK periods 2 (_32_SLCK): WKUPx shall be in its active state for at least 32 SLCK periods 3 (_512_SLCK): WKUPx shall be in its active state for at least 512 SLCK periods 4 (_4096_SLCK): WKUPx shall be in its active state for at least 4,096 SLCK periods 5 (_32768_SLCK): WKUPx shall be in its active state for at least 32,768 SLCK periods |
| LPDBC | Low-power Debouncer Period 0 (DISABLE): Disable the low-power debouncers. 1 (_2_RTCOUT): WKUP0/1 in active state for at least 2 RTCOUTx clock periods 2 (_3_RTCOUT): WKUP0/1 in active state for at least 3 RTCOUTx clock periods 3 (_4_RTCOUT): WKUP0/1 in active state for at least 4 RTCOUTx clock periods 4 (_5_RTCOUT): WKUP0/1 in active state for at least 5 RTCOUTx clock periods 5 (_6_RTCOUT): WKUP0/1 in active state for at least 6 RTCOUTx clock periods 6 (_7_RTCOUT): WKUP0/1 in active state for at least 7 RTCOUTx clock periods 7 (_8_RTCOUT): WKUP0/1 in active state for at least 8 RTCOUTx clock periods |